Filter
Top Products
When Cook 2 ends, “End” will
show on the Display and 4 beeps
will sound. (You can stop the
beeping by opening the door or
by touching CANCEL.) “End” will
remain on the Display until the
door is opened or CANCEL is
touched. The Display will then
show the time of day.
Hints for cooking with more than one cycle
You can program the cooking cycles in any order. However, when the
microwave oven is started, it will automatically go through the cycles in
order-COOK l-COOK2 (orQUlCKDEFROST-HOLD-COOK I-COOK2.)
If you want the oven to stop between cycles so that you can check food,
add ingredients or additional food items, stir, turn, etc., open the door. The
oven will continue cooking where it left off when the door is closed.
I
Changing or adding instructions
You can change times, Cook Powers, or add cycles any time before
touching START or during oven operation.
-Touch the COOK cycle you wish to change or add (COOK 1 or 2).
- Touch numbers for new time, if desired.
- Touch COOK POWER, if change is desired.
-Touch number for new Cook Power, or touch COOK POWER again if high
is desired.
- Touch in new cycle and time, if desired.
- Touch START.