Filter
Top Products
7. Use the Hour and Minute pads to set the
desired start time. Push the “up”
(A)
or “down”
(r) pad(s) until the correct time shows in the
display.
This example shows a desired start time of 2
o’clock. The oven will automatically shut off at
2:30 (the set start time plus the set cook time).
6. Push the Start/Enter pad. DELAY and BAKE
will light up in the display to indicate that the
oven is programmed to start at a later time.
NOTE:
The display will show “door” and a
tone will sound once a minute for 5 minutes if
the door is latched when you try to bake/roast.
You can change the temperature or time
settings any time after pushing the Start/Enter
pad by repeating just Steps 3 through 7.
9. When the start time is reached, a one-second
tone will sound and DELAY will go off. The
display will show the set cook time. “Lo”“,
HEAT, TIMED and BAKE will light up in the
display to show that the oven is heating. The
display will count down the baking/roasting
time in minutes.
10.
When the baking/roasting time is completed,
the oven will turn off automatically, beep four
times and “End” will show in the display. You
will also hear four
1
-second tones every
minute until you push the Off/Cancel pad.
NOTE:
To disable reminder tones, push and
hold the Cook Time pad for
4
seconds. To
reactivate tones, repeat this procedure.
To cancel the MEALTlMER”control
setting:
l Push the Off/Cancel pad to return the display to
the time of day.
22