Filter
Top Products
13
Door stop
Spacer
Shim
Hinge Pin
Screws
Spacer
Hinge
Bracket
Door stop
Spacer
Screw
Shim
Hinge pin
Screws
Plug
Cover
Screws
Top hinge
Spacer
Screws
CENTER HINGE
TOP HINGE
BOTTOM HINGE
CHANGING THE LIGHT BULB
To change the refrigerator light:
1. Unplug refrigerator or disconnect power.
2. Reach behind the Control Panel and remove the bulb.
3. Replace the bulb with a 40-watt appliance bulb.
4. Plug in refrigerator or reconnect power.
NOTE: Not all appliance bulbs will fit your refrigerator. Be
sure to replace the bulb with one of the same size and
shape.
REVERSING THE DOOR SWING
TOOL NEEDED:
5
⁄16-inch hex-head socket wrench, No. 2
Phillips screwdriver, flat-head screwdriver,
1
⁄2-inch open-
end wrench.
SUGGESTION: Reversing the door swing should be
performed by a qualified person.
IMPORTANT INFORMATION:
•
Before you begin, turn refrigerator OFF, unplug it, and
remove any food from door shelves.
•
When removing hinges, keep doors closed until ready
to lift free from cabinet.
•
To remove doors, start at the top hinge and work your
way down.
•
To replace doors, start at the bottom hinge and work your
way up.
•
Line up doors so they are centered between the sides of
the cabinet and parallel with each other.
•
Seal all unused openings with screws or plastic plugs.
Moisture will enter any openings.
NOTE: After the doors are reversed, reinstall the handles. If
the doors are not shutting on their own, see the “Door
Closing and Alignment” section.
continued on next page