Filter
Top Products
Adjusting the Oven Temperature Control
Does your oven seem hotter or colder than your old oven? The temperature
of your old oven may have shifted gradually without your noticing the change.
Your new oven is properly adjusted to provide accurate temperatures. But wher
compared to your orb oven, the new design may give you different results.
If after using the oven for a period of time, you are not satisfied with the
temperature settings, they can be
adjusted by following these steps:
1.
Pull the Oven Temperature Control
Knob straight off.
TOOTW
NOTCHES
3. To lower the temperature, move
the tooth a notch closer to LO.
Each notch equals about 10°F
(5°C).
LOCKING
I. Loosen the locking screws inside
the control knob. Note the posl-
tlon of the notches.
NOTCHES
TOOTH
4. To raise the temperature, move
the tooth a notch closer to HI. Eacl
notch equals about 10°F (SC].
Tighten the locklng screws
and
replace the control knob.