Whirlpool RF336PXP Range User Manual


 
4.
Put food in the oven. Note:
Oven
5. When baking is done, turn both
racks, walls and door will be
the Oven Temperature Control
hot.
and the Oven Selector to OFF.
During baking, the elements will turn on and off to keep the oven temperature
at the setting. The Oven Signal Light will turn on and off with the elements.
The fop element helps heat during baking, bul does not turn red.
Adjusting the Oven Temperature Control
Does your oven seem hotter or colder than your old oven? The temperature
of your old oven may have shifted gradually without your noticing the change.
Your new oven is properly adjusted to provide accurate temperatures. But when
comparing to your old oven, the new design may give you different results.
If after using the oven for a period of time, you are not satisfied with the
temperature settings, they can be adjusted by following these steps:
1. Pull the Oven Temperature
Control straight off.
Loosen the locking screws inside
the control knob. Note the
posi-
flon of the notches.
To lower the temperature,
move
a notch closer to LO. Each notch
equals about 10°F (5°C).
2. To raise the temperature,
move
a notch closer to HI. Each notch
equals aboutlO”F (5°C).
Tighten the locking screw and
replace the control knob.
8