Filter
Top Products
To replace:
NOTE: The nails or screws you inserted must still be
in both sides of the door.
1.
Grasp the door on the sides with your fingers on
the front of the door and your thumbs on the
inside surface.
t&MOVING THE OVEN DOOR (CONT.)
2. Rest the hinge hanger so that it is flat (at the
Remove nail
bottom of the hinge hanger on the bottom of the
or screw
front frame slot). -
-
3. Position the door with the hinge hanger slots
almost parallel to the front frame.
4. Push up and in until the hinge hanger slots
become fastened to the range. Lower the door
and rotate it slightly from the front to the back
until the slots are fully fastened. The hinge
hanger will be close to the bottom of the front
frame slot.
5. Pull door open about halfway and remove the
nails or screws.
6.
Close the door.
Range
/
Hinge
l
hanger
Hinge
hanger
- flat
’ Front frame
slot bottom
33