Whirlpool RF365EXP Range User Manual


 
The Oven Light
The oven light will come on when you open the oven door. To turn the light on
when the oven door is closed, push the Oven light switch on the console. Push it
again to turn off the light,
2. Remove the bulb cover in the
back of the oven by pulling out
and pushing the wire holder
to the side.
3. Remove the light bulb from its
socket. Replace the bulb with a
40-watt appliance bulb.
4. Replace the bulb cover and snap
the wire holder in place.
Turn the power back on at the
main power supply.
I
CAUTION: The bulb cover must be in place when using the oven. The cover
protects the bulb from breaking.
NOTE: The Oven light will not work during the self-cleaning cycle.
If you need service or assistance,
we suggest you follow these four steps:
1. Before calling for assistance...
Performance problems often result
from little things you can fix yourself
without tools of any kind.
If nothlng operates:
l
Is the power supply cord plugged
into a live circuit with the proper volt-
age? (See “Installation Instructions:‘)
l
Have you checked the main fuse or
circuit breaker box?
If the oven will not operate:
l
Is the Oven Selector turned to a set-
ting (BAKE or BROIL, but not TIMED
BAKE]?
22
l
Is the Oven Temperature Control
turned to a temperature setting?
It surface units will not operate:
. Have you checked the main fuse or
circuit breaker box?
l
Are surface units plugged in all the
way?
l
Do the control knobs turn?
If surface unit control knob(s) will
not turn:
l
Did you push in before trying to turn?