Whirlpool RF365PXY Range User Manual


 
4. When terminal Is pushed Into the
receptacle as far as lt will go, push
down
the edge of the surface unit
opposite the receptacle. The element
hold-down clip will keep the surface unit
from moving around.
NOTE: Reflector bowls reflect heat back to
the utensils on the surface units. They also
help catch spills. When they are kept clean,
they reflect heat better and look new longer.
If a reflector bowl or trim ring gets discol-
ored, some of your utensils may not be flat
enough, or some may be too large for the
surface unit. In either case, some of the heat
that’s meant to go into or around a utensil
goes down and heats the reflector bowl or
trim ring. This extra heat can discolor it.
Lift-up cook-top
1. Lift
front of cooktop at both front corners
until the support rods lock into place.
Personal Injury Hazard
Be sure both support rods are fully
extended and in the locked position.
Failure to do so could result in per-
sonal injury from the cook-top acciden-
talfy falling.
Product Damage Hazard
Do not drop the cooktop. Damage
could result to the porcelain and the
cooktoo frame.
2.
Wipe
with warm, soapy water.
Use a
soapy steel-wool pad on heavily soiled
areas.
3.
To lower the cooktop, lift
cooktop from
both sides while pressing the support
rods back to unlock them.
Lower
the
cooktop into place.
25