Filter
Top Products
Caring For Your Range
Burn and Electrical Shock Hazard
Make sure all controls are OFF
and the range is cool before
cleaning. Failure to do so can *
sult in burns or electrical shock.
Control panel and knobs
1. Turn control knobs to the OFF
position.
2. Pull control knobs and buttons
straight off.
3. Use warm soapy water or spray
glass cleaner, and a soft cloth, to
wipe the control panel. Rinse and
wipe dry.
4. Wash control knobs and buttons in
warm soapy water. Rinse well and
dry. Do not soak.
5. Replace control knobs and buttons
by pushing them firmly into place.
NOTE: When cleaning, never use steel
wool, abrasives, or commercial oven
cleaners which may damage the finish.
After cleaning, make sure all control
knobs point to the OFF position. Make
sure you have not turned oven ON
when replacing buttons. If oven has
been turned on, push Oven Off button.
cooktop
This cooktop is designed for easy care.
However, for ease in cleaning and to
keep the surface looking like new, the
cooktop surface must be soil-free
before heating. Try to get in the habit of
wiping the surface with a clean, damp
paper towel before each use. Cooked
on soils are difficult to remove. Foods
spilled directly on the surface units will
not burn off as on standard open-coil
burners. To maintain best appearance,
see “Cleaning tips” on page 18.
17