Filter
Top Products
6. Push the Start/Enter pad. IO’“, HEAT, BAKE,
TIMED and the set cook time will show in the
display to indicate that the oven is heating.
NOTE: The display will show “doof and a
tone will sound once a minute for 5 minutes if
the door is latched when you try to bake/roast.
You can change the temperature or time
settings any time after pushing the Start/Enter
pad without pushing the Start/Enter pad again.
7. The display will count down the baking/
roasting time in minutes.
6. When the baking’roasting time is completed,
the oven will turn off automatically, beep four
times and “End” will show in the display. You
will also hear four 1 -second tones every
minute until you push the Off/Cancel pad.
NOTE: To disable reminder tones, push and
hold the Cook Time pad for 4 seconds. To
reactivate tones, repeat this procedure.
To cancel the MEALTIMER” control setting:
l Push the Off/Cancel pad to return the display to
the time of day.
Method Z-Using Stop Time:
1. Position the oven rack(s) properly and put
food in the oven.
2. Make sure the clock is set to the correct
time
of day. (See
“Setting the cloclc on
page 12.)
3. Push the Bake pad to enter the Bake mode.
Use the Temp pad(s) to set the desired
temperature. Push A to raise the temperature
or V to lower the temperature in 5°F incre-
ments. Use these pads until the desired
temperature shows in the small display.
After you have set the desired temperature,
the display will show the set temperature and
the time of day. BAKE will light up.
19