Whirlpool RM988PXP Microwave Oven User Manual


 
Command pads
Touch Command Pads to tell the
microwave oven what to do and in
what order to do it. Examples:
- CLOCK SET tells the oven you are
going to set the clock.
- START tells the oven to start.
Each Command Pad (except CLOCK
SET, START and CANCEL] lights an
Indicator Light on the digital display.
The Indicator Light comes on when
you touch the Command Pad.
Number pads
Once you’ve touched a Command
pad to tell the oven what to do, you’ll
touch Number Pads to tell it...
-
a time,
-
a Cook Power,
-a food temperature.
Programming tone
Each time you touch a pad you will hear a tone. If you do not hear a tone,
it is because the instruction is not correct, or it is because the tones have been
removed,
EXAMPLE: If you touch a Number Pad before you touch a Command Pad, you
will not hear a tone. The instruction is not correct.
If you want to remove the tone: If you want to replace the tone:
l
Open the door.
l
Open the door.
l
Touch CANCEL twice, then START.
l
Touch CANCEL twice, then START.
l
The tone will not sound for any
l
The tone will sound for any correct
touch.
touch.
Setting the clock
When the oven is first plugged in, the Clock,Display shows 88:88. If the electric
power ever goes off, the ClockDisplay will again show all 8’s when the power
comes back on.
You can cook or use the Minute Timer without setting the clock, but the display
will be blank after cooking
DO THIS...
THIS HAPPENS...
1.
Touch CLOCK SET.
8
The Display will show a “0” and
the colon will start to flash. [The first
Number Pad must be touched
within 5 seconds or the display will
go blank. Touch CLOCK SET again
and continue.)