PART
Door liners and
gaskets
Plastic parts
(covers and
panels)
Defrost pan
WHAT TO USE
HOW TO CLEAN
Sponge, soft cloth
l Wash, rinse and dry thoroughly.
or paper towel with
mild detergent and
DO NOT USE cleaning waxes, concen-
warm water
trated detergents, bleaches or cleaners
containing petroleum on plastic parts.
Soft, clean sponge
l Wash, rinse and dry thoroughly.
or soft, clean cloth
with mild detergent
DO NOT USE paper towels, window
and warm water
sprays, scouring cleansers or flam-
mable fluids. These can scratch or
damage material. See “Important Safety
Instructions” on page 3.
Sponge or cloth
l Remove base grille. (See page 17.)
with mild detergent
l To remove defrost pan, lift pan over wire
and warm water
brace (remove tape; if any).
l Wash, rinse and dry thoroughly.
l Replace with notched corner to the rear.
Push it in all the way.
l Make sure defrost pan drain tube is
pointing into pan.
l Replace base grille.
Condenser coils
Vacuum cleaner
with extended
narrow
attachment
l Remove base grille.
l Vacuum coils when dusty or dirty. Coils
may need to be cleaned as often as
every other month.
l Replace base grille.
Floor under
refrigerator
Floor cleaners l Roll refrigerator out only as far as the
water supply line allows.
l Clean floor.
l Roll refrigerator back into place.
l Check to see if the refrigerator is level.
21