Filter
Top Products
3. Pull the surface unit straight away
from the receptacle.
4. Liff out the reflector bowl. See
“Cleaning Chart” on page 17 for
cleaning instructions.
Replacing
2. Line up openings in the reflector
bowl with the surface unit recep-
tacle and the element hold down
clip.
3. Hold the surface unit as level as
possible with the terminal just
started info the receptacle. Push
the surface unit terminal info the
receptacle.
4. When terminal is pushed info the
receptacle as far as if will go, push
down the edge of the surface unit
opposite the receptacle. The ele-
ment hold down clip will keep the
surface unit from moving around.
14