Filter
Top Products
Adjusting the refrigerator shelves
The refrigerator shelves can be adjusted to
match the way you use your refrigerator.
To remove the shelves:
1. Remove items from the shelf.
2. Slide shelf straight out to the stop.
3. Lii back of shelf over stop.
4. Slide shelf out the rest of the way.
To replace the shelves:
1. Slide back of shelf into shelf track in wall
of cabinet.
2. Guide front of shelf into shelf track.
3. Slide shelf in all the way.
Removing the crispers and cover
To remove the crispers:
1. Slide crispers straight out to the stop.
2. Lift the front.
3. Slide out the rest of the way.
4. Replace in reverse order.
To remove the cover:
1. Lift cover front and remove the cover
support.
2. Lift cover up and slide out.
To replace the cover:
1. Fit cover tabs into lowest cabinet slots
and push in. Lower the front retainers into
place.
2. Insert cover support (with the long tab
toward the front) into the groove on the
underside of the cover.
NOTE: If the support needs adjustment,
turn base clockwise to raise or counter-
clockwise to lower.
Lift cover front,
then the back.
9