Filter
Top Products
Removing the meat drawer and cover
Remove the meat drawer and cover for easier
cleaning.
To remove the meat dmwer:
1. Sk meat drawer out to the stop.
2. Lii the front of the meat drawer.
3. Slii meat drawer out the rest of the way.
4. Replace in reverse order.
To remove the cover:
1. Remove meat drawer.
2. Push cover hack to release the rear of the
cover from the shelf.
3. Tilt cover up at the front.
4. Pull cover fomrard and out.
To replace the cover:
Remove meat drawer before cover.
1. Ffl notches and rear edge of cover over rear
and center crossbars on the shelf.
2. Lower cover into place.
3. Replace the meat drawer.
Removing the crispers and crisper cover
Because your crispers are not the same size,
your crisper cover has an adjustable center
track so you can switch positions of the crisp-
ers. You can adjust the center track with the
cover in the refrigerator by removing the
Pull out to
the stop,
lift the
crispers and the cover insert.
To mmove the crispers:
1.
Slide crisper straight out to the stop.
2. Lii the front.
front and
pull
again.
3. Slide out the rest of the way.
4. Replace in reverse order.
To remove the cover:
1.
Push up the cover insert from the bottom,
then slide out with both hands.
2. Lii front of cover frame.
3. Lift cover frame up and out.
To replace the cover:
1. Ffi hack of cover frame into notch supports
on back wall of refrigerator, then lower the
front into place.
Remove the
cover insert.
Lift the cover
fronf then the
back
2. Slide hack of cover insert into place, theA
lower the front.