Filter
Top Products
Installing it properly
1. Allow l/2 inch (1.25 cm) air space on each
side of the refrigerator for ease of installa-
tion.
2. Allow 1 inch (2.5 cm) air space behind
and 3 inches (7.5 cm) air space above
the refrigerator for proper circulation.
3. If installing the refrigerator with the hinge
side against a wall, you might want to
leave extra space so the door can be
opened wider.
4. Make sure the floor below the refrigerator
is level and strong enough to support a
fully-loaded refrigerator.
Leveling it
Model RTI 8DK
Your refrigerator has 2 front leveling
screws-one on the right and one on the left.
To adjust one or both of these, follow the
directions below.
1. Open refrigerator door.
2. To raise front, turn screw clockwise.
3. To lower front, turn screw counterclock-
wise.
4. Check with level.
5. Close refrigerator door.
Model RT18EK
Your refrigerator has 2 front leveling legs-
one on the right and one on the left. To
adjust one or both of these, follow the
directions below.
1. Open the refrigerator door.
2. Tilt refrigerator back slightly.
3. Turn leveling leg to adjust height.
4. Replace refrigerator on floor.
5. Check with level.
6. Close refrigerator door.
Right to raise;
left to lower
Use a screw-
Lower
N
4
Lower
f
Raise
Turn leveling
leg to adjust