Filter
Top Products
Model RTl8DK and RTl8HD
The meat drawer and cover can be removed
for cleaning or moved to another shelf, if
desired. Remove the meat drawer first.
To remove the meat drawer:
1.
Slide the drawer straight out to the stop.
2. Lift the front.
3. Slide drawer out the rest of the way.
4. Replace in reverse order.
To remove the cover:
1.
Remove the meat drawer.
2. Tilt front of cover up.
3. Pull cover up and out.
To replace the cover:
1.
2.
3.
Fit bottom notches of cover over rear and
center cross bars of shelf.
Lower cover into place.
Replace the meat drawer.
Lift the front,
then
the back.
Pull out tx
stop, lift the front
and pull again.
Removing the crispers and crisper cover
To remove the crispers:
1.
Slide the crisper straight out to the stop.
2. Lii the front.
3. Slide out the rest of the way.
4. Replace in reverse order.
To remove the cover:
1. For some models:
Push up glass insert
from the bottom, then slide it out with both
hands.
2. Lift front of cover frame.
3. Pull cover frame up and out.
4. Remove metal cover support.
To replace the cover:
1.
Replace metal cover support on wall
supports in front section of cabinet.
2. Fit back corners of cover frame into notch
supports
on walls of refrigerator, then
lower
front onto metal cover support.
3.
For some models:
Slide back of glass
insert into cover frame. Then lower front
to level position.
Pull out to the
Remove the
Lift front
of
12