Filter
Top Products
Exterior moisture control
Removing the freezer shelf
Removing crispers and
The Szterior Moisture Control operates
electric heaters around the door
openings. These heaters help keep
moisture from forming on the outside of
the refrigerator.
1. Use the OFF setting when humidity
is low.
2. Use the ON setting if moisture
forms on the outside of the
refrigerator.
~$I.j;;e~g refrigerator
Shelves can be adjusted to match the
way you use your refrigerator.
To remove shelfi
1. Remove food from shelf.
2. Tilt up at front.
3. Lift up at back
4. Pull shelf straight out.
To
replace
shelf:
1. Guide the rear hooks into the slots
in the shelf supports.
2. Tilt up front of shelf until hooks
drop into slots.
3. Lower front of shelf into position.
To remove shelf:
1. Lift front slightly.
2. Lift back off supports.
3. Replace in reverse order.
t;ey;eFg freezer door
The freezer door shelves can be removed
for easier cleaning.
To
remove shelves:
1. Grasp shelf at both ends.
2. Lift up and pull out.
To replace shelves:
1. Insert shelf hooks into guides on
both sides of door liner.
crisper cover
To remove crisper:
1. Slide out to the stop.
2. Lift the front.
3. Slide out the rest of the way.
4. Replace in reverse order.
To remove cover:
1. Push up glass insert from bottom,
then lift out with two hands.
2. Lift front of cover frame.
3. Pull cover frame up and out.
4. Remove metal cover support.
To
replace
cover:
1. Replace metal cover support on
wall supports in front section of
cabinet.
2. Fit back of cover frame into notch
supports on walls of refrigerator,
then lower into place.
3. Slide back of glass insert into place,
then lower front.
Removing meat drawer and
cover
2. Push down to lock into place.
To remove meat drawer:
1. Slide out to the stop.
2. Lift the front.
3. Slide out the rest of the way.
4. Replace in reverse order.
To remove cover:
1. Tilt front of cover up, lift at back
and pull straight out.
2. Replace in reverse order.
Page 5