Filter
Top Products
Before Using Yc:wr
Refrigerator
I
In This Section
Pa*
I
I
Cleaning your refrigerator
................
.5
In stalling
it properly
........................
.6
Plugging ft In
.
..r ................................... 5
Lwellng it ..........................................
6
I
It is important to prepare your refrigerator for use. l’his section tells you how to clean it,
connect it to a power source, install it and level it.
Cleaning your refrigerator
Removing packaging materials
NOTE: Do not remove any permanent
Remove tape and any inside labels (except
ina,truction labels inside your refrigerator. Do
the model and serial number labels) before
no: remove the Tech Sheet fastened under
using the refrigerator.
tht ! refrigerator at the front.
To remove any remaining glue:
Clleaning it before use
l
Rub briskly with your thumb to make a ball,
Afl er removing all packaging materials,
then remove.
clean your refrigerator before using it, if
OR
na:essary. See cleaning instructions on
l
Soak area with liquid handdishwashing
pa!jes 13 and 14.
detergent before removing glue as de--
scribed above. Do not use sharp instru-
ments, rubbing alcohol, flammable fluids or
abrasive cleaners. These can damage the
material. See “Important Safety Instruc-
tions” on page 3.
Plugging it in
Recommended Grounding Method
A 115 Volt AC, 60 Hz., 15 or 20 ampere
fused and properly grounded electrical
supply is required. lt is recommended that a
separate circuit serving only this appliance
be provided. Use a receptacle which cannot
be turned off with a switch or pull chain. Do
not use an extension cord.
See Electrical Requirements and Ground-
ing Instructions Sheet in your Literature
Package.
&prong ground-
ing type wall
receptacle
w
I
Refrigerator
Power cord -
grounding
Plug
5