Filter
Top Products
E. Install freezer
Parts And Features
Model RV12EFR
Level freezer so the door wiU stay open
at any position.
r
Model and
serial number
label
I
(on side wall)
1. Locate, remove and discard the 4
bolts that held the freezer in the
shipping crate.
2. Locate the 2 front leveling legs
among the packing materials.
3. Screw these legs into the front
holes on the bottom of the freezer.
The back of the freezer rests on 2
fixed supports.
4. Adjust the 2 front legs so freezer
does not rock.
Lower
storage
gate
5. Connect freezer to proper electrical
supply and attach retaining clip.
Base grille
I
(Refer to “D. Locate proper
\
6. Slide freezer into place.
electrical supply” on page 2.)
7. Place a level on top of the freezer -
. .
,
Leveling
legs -
(not
shown)
first side to side then front to
back.
Turn leg clockwise to raise a
corner. Turn leg counter-clockwise
to lower a corner.
8. Repeat step 7 until the freezer is
level.
9. After freezer is fully loaded,
recheck with level.
Model RV15EFR
Lower
legs
(not
Statio;;z
>
shelves
Key eject
lock
Page 3