Filter
Top Products
4. If
ports are clogged, clean
with a straight
6. Turn
on
the burner to determine if it will
pin.
Do not enlarge or distort port. Do not
light.
If the burner does not light after
use a wooden toothpick. If adjustment Is cleaning, contact
an authorized
needed, call
a qualified technician for
Whirlpool service technician. Do not
service.
service the sealed burner yourself.
5. After cleaning
the gas tube opening and
ports, replace
the burner cap.
Cleaning chart
Use the following table to help you clean all parts of your cooktop.
PART
WHAT TO USE
HOW TO CLEAN
Control knobs
Sponge and warm,
l
Turn knobs to OFF and pull straight away
soapy water
from control panel.
l
Wash, rinse and dry thoroughly. Do not soak.
l
Dondusesteelwoolorabmslvecleansers.
Theymaydamagethefinishoftheknobs.
l
Replace knobs. Make sure all knobs point to
OFF.
Control panel
and trim
Sponge and warm,
l
Wash, rinse and dry thoroughly.
soapy water
OR
l
Be sure to wring excess water from sponge
Paper towel and spray
before wiping around controls. Excess water
glass cleaner
in or around controls may cause damage to
the cooktop.
l
DonotueesteelHlodorabrasivecleansers.
They may damgta the finish.
l
Do not spray cleaner directly on panel. Apply
cleaner to paper towel.
Cooktop
Sponge and warm,
l
Wash, rinse and dry thoroughly.
surface
soapy water
(other than
l
Use nonabrasive, plastic scrubbing pad on
control panel)
heavily soiled areas.
l
Do not use abrasive or harsh cleansers.
They may damage the finish.
NOTE:
Do not allow foods containing acids
(such as vinegar, tomato or lemon juice) to
remain on surface. Acids may remove the
glossy finish. Also wipe up milk or egg spills
when cook-top is cool.
Surface burners,
See pages 1 O-12 for cleaning instructions.
grates, caps,
and contoured
well area
12