Filter
Top Products
Surface burner grates
1.
2.
3.
4.
Replace the burner grates.
SI
urface burners and cooktop
Make sure all surface burners are off and the
surrounding parts are cool.
Lift off the burner grates.
Wash the grates with warm, soapy water.
Use a nonabrasive plastic scouring pad for
heavily soiled areas. Rinse and dry well.
lgnitor
The cooktop and burner box areas are specially
designed to make cleaning easier. Since the four
burners are sealed, cleanups are easy and
convenient.
To clean the cooktop, wipe with a damp cloth
and dry.
Cleaning the contoured well areas
The contoured well is a recessed area located
around each burner. If spills occur in the con-
toured well section, blot up spill with an absorbent
cloth. Wipe with a clean, damp cloth and dry.
Contoured well area
When cleaning the cooktop area or around the
burner base, use care to prevent damage to the
ignitor. If a cleaning cloth should catch the metal
ignitor electrode, it could damage or break the
electrode. If the electrode is damaged or broken,
the surface burner will not light. When cleaning
the cooktop, leave the burner cap in place to
protect the electrode from possible damage.
7