Filter
Top Products
Using your range
SURFACE
GRIDDLE CONTROL KNOB
;)WPI;$T BURNER
(Models SF5340ER,
OVEN TEMP
OVEN LIGHT
.
INDICATORS SF514OSR/ER, SF514ESR/ER) _CoNTRoL
SWITCH 1
\
LEFT REAR
CONTROL KNOB
CONTROL KNOB
Using the Surface Burners
RIGHT FRONT \
RIGHT iEAR
CONTROL KNOB CONTROL KNOB
These ranges are equipped with either standing pilots or electronic igniters.
Standing pilots must be lit initially with a match following the directions on
page 10. The pilot light will remain lit when the burners are turned Off. To turn a
burner on again, just push in and turn the control knob to llTE and the burner
will light. Electronic ignitors automatically light the burners each time they
are used.
Surface Burner Indicators
The solid dot in the surface burner
indicator shows which surface burner
is turned on by that knob.
urned to LITE position. On elec-
tronic
ignitor models, the clicking
sound is the ignitor sparking.
TO stop the clicking sound after the
burner lights, turn the control knob
back to a desired setting. On models
SF5340ER, SF514OERlSR and SF514ESRlER
the control knob has stops at HI and
LO,
however as on any model the
control knob can be set anywhere
between HI and LO. Do not cook with
the control in the LITE position.
In Case of a Prolonged Power Failure
SUrfaCe burners with electronic ignitors can be manually lighted. Hold a lit
match near the burner and turn the control to the LITE position. After the burner
lights, turn the control to the desired setting. Power failures will not affect Stand-
ing Pilots.
6