Filter
Top Products
Before Using Your
Refrigerator
It is important to prepare your refrigerator for use. This section tells you how to clean it,
connect it to a power source, install it, and level it.
Cleaning your refrigerator
Removing packaging materials
NOTE:
Do not remove any permanent
Remove tape and any inside labels (except
instruction labels inside your refrigerator. Do
the model
and
serial number label) before
not remove the Tech Sheet fastened under
using the refrigerator.
the refrigerator at the front.
Cleaning it before use
After removing all packaging materials,
clean your refrigerator before using it, if
necessary. See cleaning instructions on
pages 20-21.
To remove any remaining glue:
l
Rub briskly with thumb to make a ball,
then remove.
OR
l
Soak area with liquid handdishwashing
detergent before removing glue as
-
described above. Do not use sharp
instruments, rubbing alcohol, flammable
fluids, or abrasive cleaners. These can
damage the material. See “Important
Safety Instructions” on page 3.
Plugging it in
Recommended Grounding Method
A115Volt,60Hz.,AConly15or20am-
pere fused and properly grounded electrical
supply is required. It is recommended that a
separate circuit serving only this appliance
be provided. Use a receptacle which cannot
be turned off with a switch or pull chain. Do
not use an extension cord.
&prong groundlng
type wall receptacle
See Electrical Requirements and Ground-
ing Instructions Sheet in your Liierature
Package.
grounding
plug
6
WITN CUESlIONS OR COYYENTS