Filter
Top Products
Method Z-Using Stop Time:
1.
2.
3.
4.
5.
6.
7.
6.
Position the oven rack(s) properly and
put food in the oven.
Set the Oven Selector to TIME BAKE.
Set the Oven Temperature Control Knob
to the desired temperature.
Push the Stop Time pad. The time of day
with the colon flashing and the Stop Time
Indicator Light will show in the display.
Use the Hour and Minute pads to set the
desired stop time. Push the “up” or
“down” pad(s) until the correct time
shows in the display.
This example shows a desired stop time
of 2 o’clock. The cook time will be the
difference between the stop time and the
current time of day.
Push the Start/Enter pad. The OVEN
HEATING Indicator Light will come on.
NOTE: You can change the Stop Time
after pushing the Stat-t/Enter pad by
repeating just Steps 4 and 5.
The display will count down the baking/
roasting time in minutes.
When the baking/roasting time is
completed, the oven will turn off auto-
matically, beep four times, and “End” will
show in the display. You will also hear
two tones once every minute until you
push the Cancel/Off pad.
NOTE: To disable the reminder tones, push
and hold the Timer Set pad for 4 seconds.
To reactivate the tones, repeat this proce-
dure.
20