Filter
Top Products
28
Replacing
1. Make sure all coil elements are off and cool
before replacing coil elements and reflector
bowls.
2. Line up openings in the reflector bowl with the
coil element receptacle.
OFF
COIL ELEMENTS AND REFLECTOR BOWLS
Removing
1. Make sure all coil elements are off and cool
before removing coil elements and reflector
bowls.
2. Push in the edge of the coil element, opposite
the receptacle. Then lift it just enough to clear the
reflector bowl.
3. Pull the coil element straight away from the
receptacle.
4. Lift out the reflector bowl. See the “Cleaning
chart” earlier in this section for cleaning
instructions.
OFF
CARING FOR YOUR RANGE