Filter
Top Products
15
Meat Drawer and Cover
(on some models)
To remove the meat drawer:
1. Slide meat drawer out to the stop.
2. Lift front of meat drawer with one hand while
supporting bottom of drawer with other hand. Slide
drawer out the rest of the way.
3. Replace by sliding the drawer back in fully past the
drawer stop.
To remove the cover:
1. Remove meat drawer.
2. Push cover back to release the rear clips from the shelf.
3. Tilt cover up at the front.
4. Pull cover forward and out.
To replace the cover:
1. Fit notches and clips on underside of cover over rear
and center crossbars on the shelf.
2. Lower cover into place.
3. Pull cover forward to secure rear clips onto the shelf.
4. Replace the meat drawer.
Crisper and Crisper Cover
(on some models)
To remove the crisper(s):
1. Slide crisper(s) straight out to the stop.
2. Lift the front.
3. Slide out the rest of the way.
4. Replace the crisper(s) in reverse order.
Style 1
To remove the plastic cover:
1. Remove crisper(s).
2. Lift cover front and remove the cover support.
3. Lift cover up and slide out.
Style 2
To remove the glass cover:
1. Pull the glass straight out.
2. Replace in reverse order.
To replace the cover:
1. Fit cover tabs into lowest cabinet slots and push in.
Lower the front retainers into place.
2. Insert cover support (with the long tab toward the front)
into the groove on the underside of the cover.
NOTE: If the support needs adjustment, turn base
clockwise to raise or counter-clockwise to lower.