Whirlpool TUD2000 Dishwasher User Manual


 
Using Your Dishwasher
I
I
In This Section
Page
Page
Before starting your dishwasher
...... .
Uslng delay wash
............................. 10
Starting your dishwasher
................. .6
Using the detergent dispenser..
..... .I1
Adding a dish during a cycle..
..........
.7
Using the rinse agent dispenser..
.. .I2
Changing a cycle setting ...................
6
Quiet operating tips
.......................... 13
Changing an option
............................ 6
Water temperature tlps
................... .I4
Canceling a cycle
...............................
6
Energy saving tips
............................
14
Cycle selectton chart
.......................... 9
Special tips on dishwasher use
..... .I5
What happens in each option..
.......
.I0
Operating your dishwasher properly enables you to obtain the best possible results. This
section explains proper dishwasher operation.
Before starting your dishwasher
1.
Properly load the top rack, bot-
tom rack, and the silvemare bas-
ket. See pages 16-l 8.
4. Check the rinse agent dis-
penser. See pages 12 and 13.
2. Spin the lower spray arm with
lower rack in place to make sure
nothing prevents arm from tum-
ing freely.
3. Add detergent. See pages
11 and 12.
5. Push door firmly when closing
and it will automatically latch.
6. Run hot water at sink nearest
dishwasher until water is hot.
Turn off water.
Starting your dishwasher
The dishwasher will wash and dry dishware according to the selections you make on the
control panel.
1.
Select a drying option. See pages 9 and
10 for description.
NOTE:
Select ENERGY SAVER or
ENERGY SAVER DRY for the Rinse &
Hold cycle.
For models with three buttons,
the
Heated Dry option is automatically
selected with the Pots & Pans cycle.
On some
mcd+
6