Filter
Top Products
What happens in each option
Heat Dry option
If the Heat Dry option is selected, air in the
dishwasher is heated during the “dry” part
of the cycle. For best results, use a liquid
rinse agent.
SELECT
or
or
Energy Saver (Dry) option
If the Energy Saver (Dry) option is selected,
air in the dishwasher is not heated during
the “dry” part of the cycle. Using this option
helps save energy, but dishes take longer to
dry (overnight) and some water spotting may
result. Some items (such as plastics) may
need towel drying. For best drying results,
use a liquid rinse agent.
models with
models wlth models
with
rocker switch
3 or 5 buttons 7 buttons
SELECT
or
moclale wfth
models with buttons
rocker switch
Low-Energy Washing option
(on some models)
When the Low-Energy Washing option is
selected, water heating is reduced during
the main wash and final rinse. This will
reduce the amount of electricity needed to
run the dishwasher. However, dishes may
not wash as well. See page 14.
Using delay wash
(on some models)
You can set the dishwasher to start a cycle 1 or 2 hours later.
1. Push desired Cycle Selector button. -
2. Push desired Option Selector button(s).
3. Turn Cycle Control knob clockwise to the
number of hours you want the dishwasher
to delay before the selected cycle starts.
4. Close and latch the door.
NOTE:
l You can add items while time is counting
down. Close and latch the door. The Cycle
Control knob will not advance if the door is
unlatched.
l Rinse & Hold and Light Wash cycles cannot
be delayed.
Example for P-hour delayed Pots & Pans
cycle wlth Energy Saver Dry option
10