Whirlpool WDF530PAYM Dishwasher User Manual


 
9
OPTION SELECTIONS
OPTIONS DISH LOAD TYPES DESCRIPTIONS USE WITH:
Pans, casseroles,
etc., with tough
food soil.
Activates the POWERSCOUR™ spray jets and provides intensified
water spray to the back of the lower level rack.
May add heat and time to the cycle.
Sensor, Heavy or Normal
cycle
Loads containing
tough, baked-on
food.
Increases the target water temperature during the wash portions of
the cycle.
Adds heat, wash time and water to the cycle.
Sensor, Heavy or Normal
cycle
To sanitize your
dishes and
glassware in
accordance with
NSF/ANSI Standard
184 for Residential
Dishwashers.
Raises the water temperature in the final rinse to approximately
155°F (68°C). This high temperature rinse sanitizes your dishes
and glassware in accordance with NSF/ANSI Standard 184 for
Residential Dishwashers. Certified residential dishwashers are not
intended for licensed food establishments.
The Sanitize or Sani Rinse option adds heat and time to the cycle.
Sensor, Heavy or Normal
cycle. Only these
sanitization cycles have
been designed to meet
the NSF/ANSI
requirements.
For best drying
results, dry dishes
with heat.
High Dry provides
the optimum dry
performance. Eco
Dry provides energy
savings and good
dry performance.
Turn off (air dry) when loads contain plastic dinnerware that may be
sensitive to high temperatures.
High Dry with the use of rinse aid will provide the best drying
performance.
All cycles
To run your dish
washer at a later
time or during off-
peak hours.
Delays the start of a cycle up to 8 hours (on models with
2-4-8 Hour Delay).
Select a wash cycle and options. Press Delay until reaching the
desired hours for the delay to start. Press START/RESUME. Close
the door firmly.
All cycles
Smaller loads
slightly soiled.
Uses less energy and time to clean small loads. Sensor, Heavy or Normal
cycle