Filter
Top Products
5
COOKTOP USE
Cooktop Controls
Electric igniters automatically light the surface burners when
control knobs are turned to LITE.
Before setting a control knob, place filled cookware on the grate.
Do not operate a burner using empty cookware or without
cookware on the grate.
To Set Burner Temperature:
1. Push in and turn knob counterclockwise to LITE.
All 4 surface burners will click. Only the burner with the
control knob turned to LITE will produce a flame.
2. Turn knob to anywhere between HI and LO. The clicking will
stop. Use the following chart as a guide when setting heat
levels.
Power failure
In case of prolonged power failure, the surface burners can be lit
manually. Hold a lit match near a burner and turn knob
counterclockwise to LITE. After burner lights, turn knob to
setting.
Surface Burners
IMPORTANT: Do not obstruct the flow of combustion and
ventilation air around the burner grate edges.
A.Surface burner locator
B.Left rear burner control knob
C.Left front burner control knob
D.Center burner control knob
E.Right rear burner control knob
F. Right front burner control knob
E
D
C
A
B
F
SETTING RECOMMENDED USE
LITE
■ Light the burner.
HI
■ Start food cooking.
■ Bring liquid to a boil.
WARNING
Fire Hazard
Do not let the burner flame extend beyond the edge of
the pan.
Turn off all controls when not cooking.
Failure to follow these instructions can result in death
or fire.
MED (medium) ■ Hold a rapid boil.
■ Quickly brown or sear food.
■ Fry or sauté foods.
■ Cook soups, sauces and gravies.
■ Stew or steam foods.
LO
■ Keep food warm.
■ Simmer.
A.Burner cap
B.Alignment pins
C.Igniter
D.Burner base
E.Gas tube opening
SETTING RECOMMENDED USE
A
B
C
D
E
C
D
A