Filter
Top Products
Glve the refrigerator time to cool down com-
pletely before adding food.
(This may take sev-
Refrigerator Control
/
Power Saving Control
.r-..<Twc, I
. _..5,_L
I.
.,-
Setting the controls.. .
Controls for the refrigerator and freezer are in the
refrigerator. When the refrigerator
IS
plugged in for
the first time...
1. Set the REFRIGERA-
TOR CONTROL to 3.
2. Set the FREEZER
CONTROL to B.
eral hours.]
These settings should be about right for normal
household refrigerator usage.
The controls will be set about right when milk or
juice is as cold as you like and when ice cream
is firm.
Changing the control settings . . .
If you need to adjust temperatures in refrigerator
of freezer, use the settings listed in the chart below.
l
Adjust the Refrigerator Control first.
l
Wait at least 24 hours between adjustments
l
Then adjust the Freezer Control, if needed.
RECOMMENDED CONTROL
CONDITION:
REASONS:
SETTINGS:
---... ._.-_~-l--_l_ _-_ ._ ...-I -“-_, . ,--___ _ --_._.____ _I _..- -_- -.._--_
If Refrigerator
Door opened often
Refrigerator
Section is
Large amount of food added
Freezer
:
TOO WARM
Room temperature too warm
-..-_ --.._ -.-~
--,______---___-__I- -... _-..I_ ..-.- -“-----
--
If Freezer Door opened often
Refrigerator
3
Section is Large amount of food added
Freezer
A
TOO WARM Very cold rmrn temperature
QUESTIONS?
.,,calt your If Refrigerator
(can’t cycle often enough]
--. ~-I_-- -..= --^--.-.-~-..^
COOL-LINE” Section is
Controls not set correctly
Refrigerator
2
service
for your conditions
Freezer
B
assistance
TOO COLD
---___--
telephone
If ICE isn’t
Heavy ice usage
Refrigerator
3
number
MADE FAST ENOUGH
Very cold room temperature
Freezer
A
(page 111.
(can’t cycle often enough)
If BOTH SECTIONS Door opened often
Refrigerator
4
are TOO WARM
Large amount of food added
Freezer
0
Very warm or very cold
room temperatures
Power Saving Control.. .
The
Power Saving Control
on the Control Con-
sole operates electric heaters around the door I,
openings. These heaters help keep moisture from
forming on the outside of the refrigerator.
2
Use the “CONSUMES LESS ENERGY” setting when
humidity is low.
Use the “REDUCES EXTERIOR MOISTURE” setting
only if moisture forms on the outside of the
refrigerator.
5