Filter
Top Products
NORMAL WASH Cycle
A double wash for normal to heav-
ily soiled loads. (The Energy Guide
Label data is based on this Cycle.)
Cycle time is about 6.3 minutes.
LIGHT WASH Cycle
For normal, everyday soiled loads.
Cycle time is about 58 minutes.
RINSE & HOLD Cycle
For rinsing a few items to be
washed one or more days later.
Cycle time is about12 minutes.
Use AIR DRY only.
HEAT DRY or AIR DRY?
dishwasher is heated during the “dry” part of
the cycle.
If the HEAT DRY Optton is selected, air in the
If the AIR DRY Optton is selected, air in the
dishwasher is not heated. Using this option helps
save energy, but dishes take longer to dry (over-
Some items (such as plastics) may need towel
drying.
night) and some water spotting may result.
For best resultsuse a liquid rinse aid such as
Jet-Dry?
Changing a setting
You can change a setting anytime during
any cycle.
1. Lift up on the door latch to unlatch the door
and stop the cycle. Don’t open the door until
the spray arms stop spinning.
2. Turn the Cycle Control Knob clockwise to the
cycle you want.
3. Be sure the detergent dispensers are filled
properly for the new cycle.
4. Press door firmly to latch it. The dishwasher
will automatically start the new cycle.
To add a dish after starting
1. To be sure the added item is washed and
rinsed, make sure the Cycle Control Knob
has not passed LIGHT WASH.
2. Lift up on the door latch to unlatch door to
stop the cycle. Don’t open the door until the
spray arms stop spinning.
3. Open the door and add the dish.
4. Close the door. Do not latch it. Wait 30 sec-
onds for air in the dishwasherto warm up. This
helps reduce the amount of moisture that
can come from the vent when restarting the
cycle.
5. Press door firmly to latch it. The dishwasher
will automatically start where it stopped.