Filter
Top Products
Proper Loading
Cup
and glass load
Preparation for loading
It is not necessary to rinse dishes before
putting them into the dishwasher. Just
remove large pieces and quantities of food
and
bones. The filtering system helps keep food parti-
cles out of the wash water. Small particles are
flushed away as water is pumped out. Larger parti-
cles are trapped on the filter system screen. Refer
to “Dishwasher care & cleaning” on page 12 for
filter screen cleaning instructions.
Always load dishes so soiled surfaces are
reached by spray from rotating spray arm. Water
must be able to drain off completely for best drying
results. Be careful to separate items so spray can
reach all surfaces.
Top rack loading
The top rack is designed for cups, glasses and
smaller items.
Cup and glass load
l
Place so open ends face down for cleaning
and draining.
l
Load glasses in top rack only. Bottom rack is
not designed for glasses. Damage may occur.
l
Place items in the rows between prongs. Plac-
ing them over the prongs can lead to breakage.
l
Be sure lightweight items are held firmly in place.
l
China, crystal and other delicate items must not
touch each other during dishwasher operation.
Damage may occur.
Mixed load
l
Load plastic items only in the top rack.
Only plastic items marked “dishwasher safe”
are recommended.
l
Load plastic items so the force of the spray does
not move them during the cycle.
l
Plastic items can be melted in the bottom rack.
Utensil load
l
Small bowls, pans and other utensils can be
placed in the top rack.
Mixed load