Filter
Top Products
Page 9
REVERSING THE DOOR SWING OF YOUR APPLIANCE
This appliance has the capability of the door opening from either the left or right side. The appliance is
delivered to you with the door opening from the left side. Should you desire to reverse the opening
direction, please follow the following reversal instructions.
1. Remove the bottom hinge (2) by unscrewing the four lock screws (1). Be careful to hold the
door firmly after removing the screws. (Fig. 1)
2. Gently pull down to remove the door from the right top hinge and place it on a padded surface
to avoid the risk of damage. Then remove the right top hinge (7). (Fig. 2 & 3)
3. Unscrew and transfer pins (4) and (3) of the hinge plate to the opposite side. (Fig. 1)
4. Pop out the cover caps on the left side of cabinet and use them to cover the screw holes on
the right hand side.
5. Screw the alternative left top hinge (8), included in the fittings, on the left hand side of
cabinet. (Fig. 3).
6. Relocate the door to the designated position. Then screw the bottom hinge assembly on the
left designated position and tighten it after the door is leveled. (Fig. 1)
7. Remove the handle from the left side of the door and install it on the right side.