Filter
Top Products
8
When the ice layer on the inner cabinet sides is over 0.2”, the defrosting operation
should be performed to improve the refrigerating efficiency. To do this,
follow these steps below:
1. Turn off the power, and remove all items inside the freezer.
2. Allow the ice to completely melt.
Tip: To remove unpleasant odors place a piece of charcoal in the chest
It is normal to hear gurgling sounds caused by the flow of refrigerant when each
cooling cycle ends.
The surface temperature of the compressor can reach 158-194°F when running.
The noise emitted by the cooling fan on the condenser is a normal function.
It is normal for the fan in the power supply to run all the time.
Always disconnect the power supply before cleaning. Clean the inside of the
cabinet whenever necessary using a solution of warm water and baking soda
(1 tablespoon to every 2 liters of water). Dry with a soft cloth.
Do not use steel brushes or harsh detergents to clean the inner liner.
Dirt from the condenser should be cleaned by a qualified technician when
necessary.
CLEANING YOUR
PORTABLE FREEZER
Normal Operating Sounds and Functions
Defrosting and Deodorizing
Never
remove ice
with a sharp
object or
screwdriver.