Whynter IMC-270MS Ice Maker User Manual


 
6
CONTROL PANEL AND FEATURES
A Cube Size Indicator Lights
B Power Indicator
C Ice Full Indicator
D Water Shortage Indicator Light
E Power On/Off Button
F Cube Size Selector Button
ICE SIZE
ICE SIZE SELECTION
This ice maker produces bullet-shaped ice. The default cube size from the factory is set at
LARGE. Each time you press this button the cube size selection will change between Small and
Large. The chosen mode shall stay as selected unless changed or there is a power failure. For
the most efficient operation when ambient temperature is below 59ºF, use the small cube size
setting.
LED INDICATORS
POWER INDICATOR (GREEN)
The indicator below POWER will illuminate green when the unit is turned on.
ICE SIZE INDICATOR (GREEN)
The indicator below the selected cube size will be illuminated green.
ADD WATER INDICATOR (RED)
The ice maker automatically checks the water level in the water reservoir. If the water level is
too low, the indicator will illuminate in RED and the ice maker will stop working automatically.
Once you add water to the unit, the indicator will turn off and the ice maker will resume normal
operation.
ICE FULL INDICATOR (RED)
When the ice basket is full, the indicator will illuminate in RED. The indicator will remain lit until the
ice in the basket either melts away slowly or has been removed. The unit will stay in a “Standby”
mode until the ice has been removed / melted at which time the unit will automatically start operation
as normal.