Filter
Top Products
Copyright 2006 Wind Crest by CNP Industries 2
Install Quick Specs are for planning purposes only. Please refer to the detailed installation instructions, prior to
making any cutouts.
Island or Peninsula Mounted Hoods – Install Quick Specs
PER Series Hoods - 30” Depth (cont.)
Maximum Power Supply Required*
15 Amps @ 120 V AC, 60 Hz
20 Amps @ 120 V AC, 60 Hz (when used with
VEN150E remote ventilator)
*Electrical rating is maximum required for any
combination of ventilator and lighting.
Outdoor Electrical Requirements
Damp outdoor installations require a fault
interrupter circuit connection.
Hood Lighting Rating
• 36” and 42” widths: 100 watts w/halogen
lights
• 54” width: 200 watts w/halogen lights
Ventilator Options
640 CFM, Internal Blower: VEN060I
1000 CFM, Remote Blower: VEN100E
1500 CFM, Remote Blower: VEN150E
Ventilator Motor Ratings
VEN060I: 2.8 Amps @ 120 V AC, 60 Hz
VEN100E: 8 Amps @ 120 V AC, 60 Hz
VEN150E: 12 Amps @ 120 V AC, 60 Hz
Ventilator Dimensions & Accessory
Transitions (see Ventilator section)
CUSTOMER SPECIFICATION:
Hood Width Specified & finish:
(e.g.PER36S)
Accessories Selected: (e.g. Chrome or brass
rails and canopy extensions)
Center Support
54" models
Chrome/Brass
Rolled Pot Rail
1-7/8
3/4
Final Hood Model Selected:
Add Any Accessories:
Specify Ventilator Selected & Transitions: