Filter
Top Products
ATTENTION INSTALLER
THE METAL BRIDGE BETWEEN THE TWO-DISCHARGE
HOLES IN TOP OF HOOD MUST BE REMOVED WHEN
USING THIS VENTILATOR. SEE INSTALLATION
INSTRUCTIONS
REMOVE
TOP OF HOOD
WIND CREST
ATTENTION INSTALLER
BEFORE INSTALLING THIS BLOWER CONFIRM
THAT SERIAL NUMBER ON HOOD TO USED IN THIS
INSTALLATION IS GREATER THAN
#102796
THE SERIAL NUMBER PLATE CAN BE FOUND ON
THE LEFT HAND INSIDE WALL OF THE HOOD OR
ON THE HOOD CARTON LABEL
IF THE SERIAL NUMBER OF THE HOOD DOES NOT
COMPLY WITH THE ABOVE CONDITION THIS
BLOWER CANNOT BE USED WITH THIS HOOD.