Filter
Top Products
How to Use
This product is for household use only.
Note: Bowl holds up to 1½ cups of food. Do not overfill. Cut food
into uniform ½-inch pieces before processing. Some foods may require
processing in smaller quantities.
Note: Some foods that may be processed in your chopper are: bread,
dry cereal, hard cheese such as Romano & Parmesan, crackers, cookies,
chocolate baking bars, hard boiled eggs, fresh herbs, soft nuts such as
pecans and walnuts, fruits and vegetables such as apples, pears, celery,
onion, carrots, garlic, ginger, pickles, and radishes.
1. Remove all packaging materials before using.
2. Before using, wash lid, blade and bowl in warm soapy water; rinse
and dry thoroughly, see CARE AND CLEANING.
Caution: Blades are sharp; handle with care.
Caution: Do not immerse motor base in water or other liquids.
3. Place bowl without lid and blades on base. Line up bowl tabs with
notches in base and turn clockwise to lock into position.
4. Lower blade over drive shaft in bowl, rotating if necessary to drop
into place.
5. Cut food into ½-inch uniform pieces and place up to 1½ cups into
bowl.
6. Place lid on the bowl. Slide lid locking tab into lid locking slot and
turn until the raised arrows are aligned and the lid clicks into place.
Note: Chopper will not operate unless the lid locking tab is correctly
inserted into the lid locking slot.
7. Plug into a 120 V ~ 60 Hz outlet.
8. To start, press the PULSE/ON button for 3-5 seconds and then
release; the motor will stop. Repeat pulse for a finer consistency.
If chopper does not start, repeat steps 3 – 6.
9. When finished chopping, unplug the unit and allow blades to stop
rotating before disassembling.
10. Turn the lid counterclockwise and remove. Carefully grasp stem of
blade and lift out of bowl. Turn bowl counterclockwise to release
and lift off base.
11. Remove chopped food from bowl.
4
3
Product may vary slightly from what is illustrated.
† 1. Lid (Part # WCH200C-03)
2. PULSE/ON button
3. Bowl notches
4. Motor base
5. Drive shaft
6. Lid locking slot
7. Bowl tabs
† 8. See-thru bowl (Part # WCH200C-02)
† 9. Steel chopping blade (Part #WCH200C-01)
10. Lid locking tab
†Consumer replaceable/removable parts