Filter
Top Products
B. Safety Notes
1. Allelectrical work must be done in accordance with local and/or
national electrical code as applicable for safety. This product
must be grounded if your are unfamiliar with methods of installing
electrical wiring, secure the services of a qualified electrician.
2. Turn off power at service entrance before installing wiring or
servicing this product. (120 volt for range hood. 220 volt for electric
range ifany)
3. Turn off power to avoid risk of fire, electric shock or injuryto persor
for cleaning or maintenance such as lubrication.
4. Fireplaces. gas furnaces. water heaters and the like require proper
flow of combustion air and exhaust. Makesure this flow is not
altered when using any exhaust fan.
5. Please read specification label on product for further information
and requirements.
6. Please wear "Safety Gloves" for installation. cleaning, light bulb
changing and dismantling to reduce the risk of any bodily injuries.
CAUTION- To reduce the risk of fire and to properly exhaust air, be
sure to duct air outside. 00 not vent exhaust air into spaces within
walls or ceilings or into attics crawl spaces or garages.
.3.