Filter
Top Products
E Series Built-In Single Ovens
INSTALLATION NOTES
Wolf E series built-in ovens may be used in
a standard installation, where the face trim
overlaps stiles and rails, or in a flush inset
installation with the front of the oven flush
with surrounding cabinetry.
Complete installation specifications can be
found on our website, wolfappliance.com.
Unit dimensions may vary by ±
1
/8".
DIMENSION WILL VARY*
4
3
/4" (121 ) TYPICAL*
36" (914)
F
LOOR TO
COUNTERTOP
*Dimension must accommodate height of oven trim.
N
OTES: Location of electrical supply within opening may require additional cabinet depth.
Dashed line represents profile of unit.
E
2
8
1
/2"
(724)
OPENING WIDTH
27
3
/16"
(691)
O
PENING
HEIGHT
24" (610 ) min
OPENING DEPTH
E
5"
(127)
4"
(102)
FRONT VIEWSIDE VIEW
SPECIFICATIONS
Overall Width 29
7
/8"
Overall Height 27
7
/8"
Overall Depth 23
3
/4"*
Oven Door Clearance 22"
Oven Interior Capacity 4.5 cu ft
Oven Interior Dimensions
25" W x 16
1
/2" H x 19" D
Minimum Cabinet Depth Standard 24"
Flush Inset 25"*
Minimum Base Support 250 lbs
Opening Width 28
1
/2"
Min Inset Width 30
3
/8"
Opening Height 27
3
/16"
Min Inset Height 28
1
/2"
Electrical Requirements 240/208 V AC
60 Hz, 30 amp circuit
Electrical Rating 5.1 kW at 240 V
3.8 kW at 208 V
Shipping Weight 273 lbs
*For black glass model, increase dimension by
1
/4".
INSTALLATION
SPECIFICATIONS
Standard
Installation
OVERALL DIMENSIONS
IMPORTANT NOTE: Unless you are using cabinets
deeper than 24" (610) for a standard installation or
25" (635) for a flush inset installation, it is recom-
mended that the electrical supply be placed in an
adjacent cabinet within reach of the conduit.
Choose the location shown in the illustrations that
best suits your installation.
23
3
/4" (603)
B
EHIND FRAME
27
7
/8"
(708)
29
7
/8"
(759)
CONDUIT
CHANNEL
1" (25)*
27
1
/16"
(687)
2
5
/8"*
(67)
*
For black glass model, increase dimension by
1
/4"
(6)
.
3"
(76)
28
1
/4"
(718)
23
3
/4"
(603)
22"
(559)
9
5
/8"
(244)
8
7
/8"
(225)
29
7
/8"
(759)
TOP VIEW
OPEN OVEN DOOR
FRONT VIEW RIGHT SIDE VIEW
27
3
/16"
(691)
OPENING
HEIGHT
28
1
/2"
(724) min
FLUSH INSET
HEIGHT
28
1
/2" (724)
OPENING WIDTH
30
3
/8" (772) min
FLUSH INSET WIDTH
7
/8"(22) TOP CLEAT
7
/16" (11)
BOTTOM CLEAT
SIDE CLEATS
24
3
/4"*
(629) min
FLUSH INSET
DEPTH
1" (25)*
*For black glass model, increase dimension by
1
/4" (6).
NOTES: Minimum base support 250 lbs (113 kg).
Location of electrical supply within opening may require additional cabinet depth.
Cleats may be visible and should be finished to match cabinetry.
Dashed line represents profile of unit.
FRONT VIEWSIDE VIEW
TOP VIEW
1" (25)
SIDE CLEATS
5"
(127)
4"
(102)
E
E
E
Flush Inset
Installation
Dimensions in
parentheses are in
millimeters unless
otherwise specified.
©Wolf Appliance, Inc. all rights reserved. Features and specifications are subject to change at any time without notice. 6/12