Filter
Top Products
21
WOLF TROUBLESHOOTING GUIDE
TROUBLESHOOTING GUIDE
PROBLEM PROBABLE CAUSE CORRECTION
C
ooktop does not
C
ooktop is in Lock mode. Touch and hold the "key"
function at all
symbol for 3 seconds to unlock
the control panel.
Cooktop is in Lock mode Errors may be cleared by
a
nd the timer display shows pressing the "clear" button.
an error code. If the error reappears, contact
Wolf Customer Service.
No electricity is being Have an electrician check the
supplied to the cooktop. house power supply.
Fuse is blown or circuit Have an electrician replace the
breaker is tripped. fuse or reset the circuit breaker.
Cooktop is not connected to Have an electrician verify that
a proper electrical circuit. the proper voltage is being
applied to the cooktop.
Heating elements do not
Power supply connection Have an electrician tighten
heat properly
is loose. connections at the electrical
box.
Cooktop is not connected to Have an electrician verify that
a proper electrical circuit. the proper voltage is being
applied to the cooktop.
Improper cookware is Select proper cookware as
being used. outlined in Cookware Selection
Guide on page 19.
Heating elements cycle
Heating element temperature This is a normal function of the
off when unit is set for
limiters are temporarily cooktop. The elements will turn
full power
shutting off element due to on when the temperatures have
temperatures approaching cooled sufficiently.
the maximum allowable limit
of the ceramic glass.
Dimensions in parentheses are in
millimeters unless otherwise specified.