Wolf Appliance Company PL462212 Ventilation Hood User Manual


  Open as PDF
of 2
 
INSTALLATION NOTES
Pro hood liners are sold as a shell only. An
internal, in-line or remote blower is required.
For blower recommendations, visit our
website, wolfappliance.com.
Pro hood liners are recommended for use
with all Wolf cooking appliances.
A decorative hood can be created out of
wood, plaster, tile or metal. The shape of the
decorative hood is not critical, the only place
where the the liner and outside cover must
meet is at the bottom edge of the metal liner.
The decorative hood and liner must fit at the
bottom edge in both width and depth. The
height of the liner does not have to be the
same as the height of the decorative hood,
and is generally shorter.
IMPORTANT NOTE: For optimal performance,
a pro 27" deep wall hood is recommended for
use with ranges and rangetops that contain a
charbroiler or griddle.
Complete installation specifications can be
found on our website, wolfappliance.com.
Unit dimensions may vary by ±
1
/8".
LINER WIDTH
DECORATIVE HOOD
F
OR
19
1
/4"
31"
(787) TO 36" (914)
FOR 22
1
/2"
30" (762) T
O
36" (914)
1
2"
(305)
LINER HEIGHT
19
1
/4" (489)
LINER DEPTH
22
1
/2" (572)
LINER DEPTH
SIDE VIEW
ELECTRICAL
LOCATION
HOOD LINER
E
7
5
/8"
(
194
)
12
1
/2"
(318)
SPECIFICATIONS
Overall Widths 34
3
/8", 40
3
/8", 46
3
/8",
52
3
/8" and 58
3
/8"
Overall Height 12"
Overall Depth 19
1
/4" or 2 2
1
/2"
Bottom of Hood to Countertop 30" to 36"
Discharge Vertical
Duct Size 10" Round
Electrical Requirements 110/120 V AC
60 Hz, 15 amp dedicated circuit
Shipping Weight 45–80 lbs
INSTALLATION SPECIFICATIONS
Pro Ventilation Hood Liners
Dimensions in parentheses are in
millimeters unless otherwise specified.
VERTICAL DISCHARGE ONLY FOR VENTILATION HOOD LINERS.
OVERALL DIMENSIONS
WIDTH MINUS
6"
(152)
12" (305)
4" (102)
19
1
/4" (
489)
22
1
/2" (572)
D
EPTHS
12"
(305)
3" (76) 3" (76)
34
3
/8" (873), 40
3
/8" (1026), 46
3
/8" (1178)
52
3
/8" (1330), 58
3
/8" (1483) WIDTHS
©Wolf Appliance, Inc. all rights reserved. Features and specifications are subject to change at any time without notice. 8/12
 previous