109
Attaching the Detachable Lid
1 To attach the Detachable Lid, slide the
Lid Stem into the Lid Stem Receptacle
on the Rice Cooker Housing. Push
straight down until the Lid clicks in
place.
CAUTION: Ensure that your Lid Stem is
locked in place by attempting to
remove it by pulling straight up. A
Serious burn injury can occur if you try
to move your Rice Cooker without the
Lid locked into place.
2 Replace the Condensation Collector by
pressing straight in over the Lid Stem
until snaps into place.
Figure 2
Figure 1
Removing the Detachable Lid
1 To remove the Detachable Lid, first
remove the Condensation Collector
located under the Lid hinge by pulling
it away from the Rice Cooker Housing.
See Figure 1.
2 Remove the Detachable Lid by pushing
the Detachable Lid Stem in while lifting
the lid straight up. See Figures 2 and 3.
3 Do not attempt to remove the
Inner Lid or silicone gasket. See
Figure 5. Do not place the Removable
Lid in the dishwasher. Simply wash
the Inner Lid with warm soapy water
and rinse thoroughly.
4 If needed, the Condensation Valve can
be removed in order to rinse the steam
vent. To remove the inner condensation
valve, turn it counter-clockwise and lift
straight up. See Figure 3.
Figure 2
Figure 1
Figure 3
Figure 4
Figure 5
Inner Lid
Silicone Gasket
1
2
HSN7C_RiceCooker08 8/13/08 3:30 PM Page 9