Filter
Top Products
5
Know Your Stand Mixer
Hub
Cover
(Removes for
inserting accessories)
Wire
Whisk
Flat
Beater
Dough
Hook
Rubber
Plug for
Locking
Screw
Mixer
Head
Mixer
Head
Locking
Lever
Speed
Control
Dial
Mixer
Bowl
Beater
Shaft
4
Using Your Stand Mixer
1. Make sure mixer is turned to OFF and unplugged.
2. Tilt mixer head back by pressing down on the mixer head locking
lever. Lift until head locks into up position.
3. Place mixing bowl into base and turn clockwise to lock into place.
4. Attach beater, whisk or dough hook by pressing up into beater
shaft as far as it will go. Turn counterclockwise, hooking pin into
grooves on beater shaft.
5. Press mixer head locking lever down and lower mixer head until
it locks into place.
6. Plug cord into electrical outlet. Select desired speed. Prepare
recipe according to instructions.
7. When finished, turn speed control dial to OFF. Unplug stand
mixer from outlet.
8. Press mixer head locking lever down to raise mixer head. Remove
beater, whisk or dough hook. Grasp bowl, turn counterclockwise,
and lift straight up to remove.