Filter
Top Products
Programme Programme duration
(in minutes)
Energy consumption
(in kWh)
Water consumption
(in litres)
130-140 1,0-1,2 14-16
12 0,1 5
The pressure and temperature of the water, the var-
iations of power supply and the quantity of dishes
can change these values.
Use of the appliance
Refer to the following instructions for each step of pro-
cedure:
1. Make a check if the water softener level is correct for
the water hardness in your area. If necessary set the
water softener.
2. Fill the salt container with dishwasher salt.
3. Fill the rinse aid dispenser with rinse aid.
4. Load cutlery and dishes into the dishwasher.
5. Set the correct washing programme for the type of
load and soil.
6. Fill the detergent dispenser with the correct quantity
of detergent.
7. Start the washing programme.
If you use detergent tablets, refer to the chapter 'Use
of detergent'.
Setting the water softener
The water softener removes minerals and salts from the
water supply. Minerals and salts can have bad effect on
the operation of the appliance.
Water hardness is measured in equivalent scales:
• German degrees (dH°).
• French degrees (°TH).
• mmol/l (millimol per litre - international unit for the
hardness of water).
•Clarke.
Adjust the water softener to the water hardness in your
area. If necessary, contact your local water authority.
5