Zanussi 504238 Dishwasher User Manual


 
HOOD TYPE DISHWASHERS
TOP VERSION
EADB1 2009-06-19 The Company reserves the right to alter technical specifications without prior notice.
www.zanussiprofessional.com
ZANUSSI
P R O F E S S I O N A L
YELLOW CUTLERY CONTAINER 864242 864242 864242 864242 864242
STAINLESS STEEL INLET HOSE KIT 864016 864016 864016 864016 864016
RINSE AID LEVEL PROBE KIT FOR UC+HT
DW
864005 864005 864005 864005 864005
KIT TO MEASURE TOTAL/PART.WATER
HARDNESS
864050 864050 864050 864050 864050
KIT HACCP EKIS 922166 922166 922166 922166 922166
KIT 8 PLASTIC BOXES FOR
CUTLERY-YELLOW
780068 780068 780068 780068 780068
KIT 4 PLASTIC BOXES FOR
CUTLERY-YELLOW
865574 865574 865574 865574 865574
INTEGRATED HACCP KIT FOR UC, HT
AND POTW
864001 864001 864001 864001 864001
HACCP PRINTER KIT FOR UC, HT AND
POTW
864002 864002 864002 864002 864002
FILTER FOR TOTAL DEMINERALIZATION 864015 864015 864015 864015 864015
FILTER FOR PARTIAL
DEMINERALIZATION
864017 864017 864017 864017 864017
EXT.REVERSE OSMOSIS FILT-ATMOSPH.
BOILER
864026 864026 864026 864026 864026
DRAIN PUMP KIT FOR 50HZ
DISHWASHERS
864199 864199 864199 864199
DETERGENT PUMP KIT 864218 864218 864218 864218
DETERGENT LEVEL PROBE KIT FOR
UC+HT DW
864004 864004 864004 864004 864004
COVER GRID FOR SMALL/LIGHT ITEMS IN
RACK
867016 867016 867016 867016 867016
BRASS INLET VALVE KIT FOR UC AND HT 864000 864000 864000 864000 864000
BASKET SEMI-PROFESSIONAL
500X500X190MM
867024 867024 867024 867024 867024
BASKET FOR BULK CUTLERY-BROWN 867009 867009 867009 867009 867009
BASKET FOR 6 TRAYS 530X370MM-RED 866743 866743 866743 866743 866743
BASKET FOR 48 SMALL CUPS/24
CUPS-BLUE
867007 867007 867007 867007 867007
BASKET FOR 18 DINNER PLATES
240MM-YELLOW
867002 867002 867002 867002 867002
BASKET FOR 12 SOUP BOWLS
240MM-GREEN
867000 867000 867000 867000 867000
BASKET F.16 VERTIC.GLASSES
(H70MM)-BLUE
867023 867023 867023 867023 867023
304 AISI BACK PANEL FOR HT TOP LEVEL 864299 864299 864299 864299
304 AISI BACK PANEL FOR HT AUTO.TOP
LEV.
864308
20 L EXTERNAL MANUAL WATER
SOFTENER
860430 860430 860430 860430 860430
ZHTA
504241
ZHTA60
504242
ZHTAI
504243
ZHTAID
504238
ZHTAIAU
504240
ACCESSORIES MODELS
OPTIONAL ACCESSORIES
Electronic board with digital display
incorporating fault diagnosis system, number
of cycles counter and number of drain cycles
counter.
Double skinned insulated wall (except for
codes 504142 and 504242) ensures a low
noise level and a reduction in heat loss from
the machine.
An effective rinse system that uses only 3
litres of clean hot water per rack to ensure
lower running costs (in energy, water and
chemical consumption).
Large deep drawn wash tank and internal
wash area with round corners and no pipes
to avoid dirt built-up.
Easily removable washing and rinsing
arms, filters and rack support.
All the machines have smooth surfaces
and a wash tank with rounded corners to
facilitate cleaning.
Safety devices prevent the hood from
suddenly closing in case of spring breakage,
thus avoiding operator injury.
The fully automatic self-cleaning cycle
avoids the risk of bacteria proliferation.
The self-draining wash pump facilitates
the evacuation of stagnant water after long
periods of inactivity to ensure a higher level
of hygiene.
Load bearing frame height adjustable feet,
hood, tank, washin and rinsing arms,jets and
screws in 304 AISI stainless steel to ensure
long term reliability.
High efficiency air gap (class A) in water
inlet circuit to avoid water being siphoned
back into the network as a result of a sudden
drop in main pressures.
304L stainless steel boiler with higher
welding protection improves the resistance
again corrosion with chlorinated water
PVC water supply hose with metal
connections resistant to high water pressure.
The IPX5 water protection.
Pre-arranged for on-site HACCP
implementation and Energy Management
device.
The incorporated Soft Start feature offers
additional protection to delicate items such
as glassware and crockery and increases
wash pump reliability.
Three phase electrical connection,
convertible on-site.
Suitable to be connected to specific
pre-wash tabling, service entry and exit
tabling and roller conveyor tabling – included
in ZANUSSI Professional Handling System
range.
The machine will start with the close of the
hood and stop when the hood is opened
More ergonomic operation in Automatic
hood model (code 504240) with a button in
the control panel to close the hood and the
hood will automatically open when the cycle
finishes.
Open hood on the back side to prevent
steam blasts to the operator.
All machines are pre-arranged to accept
external dispensers.
97% recyclable by weight.
CFC free packaging.
Low noise level.
Developed and produced in ISO 9001 and
ISO 14001 certified factory.
In compliance with CE requirements.