Filter
Top Products
3
CONTENTS
2222 048-63
Instructions for the User
Important Safety Information
2
Description of the Appliance
4
Operation
5
Before using 5
Control panel 5
To start the Appliance 5
Setting the temperature 5
Use of an air circulation slider control 5
Fresh food refrigeration 6
Positioning the door shelves 6
Positioning the inner shelves 6
Cool Check Guide 7
The freezer compartment 8
Freezing fresh food 8
Frozen food storage 8
Thawing 8
Ice cube tray holder 8
Normal Operating Sounds 9
Health and Safety Guidelines
10
Maintenance and Cleaning
11
Internal cleaning 11
External cleaning 11
When the appliance is not in use 11
Changing the light bulb 11
Defrosting 11
Something Not Working
12
Service and Spare Parts
13
Customer Care
13
Guarantee Conditions
14
Instructions for the
Installer
Technical Specification
15
Installation
16
Positioning 16
Rear Spacers 16
Electrical Connection
17
Door Reversal
18
18
Door reversal directions
1. Disconnect from the electricity supply.
2. Remove all loose items, including food, store
food in a cool place.
3. Gently lay the fridge/freezer on its back with the
top held away from the floor by 5-8 cm (2-3
inches) of packing;
4. Remove the feet (2-3)
5. Remove bottom hinge (1).
6. Remove the freezer door by releasing it from the
middle hinge (H).
7. Unscrew the middle hinge.
8. Slide out the fridge door from pin (G), unscrew
the latter and then screw it down into the hinge
provided on the opposite side, after having
removed the small plugs which should then be
fitted on the opposite side.
9. Refit the fridge door and replace the middle hinge
to the left hand side.
10.Replace the door and bottom hinge (1) on the
opposite side.
11.Refit the feet (2-3) on the opposite side.
Attention
After completion of the door reversing operation,
check that the door gasket adheres to the cabinet. If
the ambient temperature is cold (i.e. in Winter), the
gasket may not fit perfectly to the cabinet. In that
case, wait for the natural fitting of the gasket or
accelerate this process by heating up the part
involved with a normal hairdryer on a low setting.
G
H
D419
Printed on recycled paper
D715 PIED/M
1
2
3