Filter
Top Products
7
Top up the rinse aid when the rinse aid indicator light on the
control panel illuminates.
It is possible to deactivate the rinse aid indicator light (see
following instructions).
To deactivate the rinse aid indicator
light proceed as follows:
(The dishwasher must be switched off)
1. Press function push buttons 1 and 2 simultaneously.
2. While keeping the function push buttons 1 and 2 pressed
switch on the dishwasher by pressing the On/Off push
button.
The On/Off indicator light comes on.
At the same time, the indicator lights of function push
buttons 1 and 2 start flashing.
3. Press function push button 2, the corresponding indicator
light keeps flashing while the indicator light of function push
button 1 turns off. At the same time the END indicator light
starts to flash.
4. Press function push button 2 again, the END indicator light
turns off, this means that the rinse aid indicator light has
been deactivated.
5. To memorise the operation, switch off the dishwasher by
pressing the On/Off push button.
To reactivate the rinse aid indicator light follow the same
process until the END indicator light starts to flash.